Hustler Raptor SD, Zero Turn Mower, 36" Deck TMI037
The Raptor SD is a heavy-duty high performance zero-turn that makes small work out of big jobs. Stronger, bigger, faster, and built to commercial standards out of big jobs. Stronger, bigger, faster, and built to commercial standards.
- Engine: Kawasaki FR651V
- HP: 21.5 hp (16.0kW) @ 3600 rpm (Please Note: Horsepower rating as tested to SAE J1995 Standards.)
- Type: Air cooled, 90 degree V-twin, normally aspirated petrol engine.
- Starter: 12-volt (see engine manufacturers specifications)
- Ignition: Electronic
- Charging System: 12-volt (see engine manufacturers specifications for current rating)
- Oil Filter: Spin-on engine oil filter / Total oil capacity(2.1 litre) w/filter
- Fuel: Unleaded fuel - maximum of 10% ethanol in fuel (see engine manufacturers specifications)
- Fuel Capacity: 11.35 L (3.0 US gal)
- Fuel Filter: Replaceable, automotive-typ
- Air Filter: Cartridge air filter
- Cooling: Air cooled. Fly-wheel fan
- Governor: Mechanical
- Drive System: Dual hydrostatic Hydro-Gear ZT2800
- Ground Speed - Forward: Infinitely variable 0-12.1 kph (0 - 7.5 mph)
- Ground Speed - Reverse: 0-6.4 kph
- Steering: Twin-lever, SmoothTrak steering provides independent control of each drive wheel. Speed, forward, reverse, brake, and true zero-degree-radius turns are all controlled with hand-operated controls.
- Brakes: Hydrostatic dynamic braking. Parking: Patented automatic park brake system.
- Caster Tyres: 13 x 5.0 - 6, rib tread
- Tyres - Drive: 20 x 6.5 - 10, turf tread
- Weight: 265.8 kg (586 lbs)
- Seat: Moulded-vinyl seat with adjustable armrests. Fore and aft sliding adjustment. Seat-pan suspension springs are standard.
- Construction: "Mainframe is 3.25" x 1.5" x .120" (8.25 cm x 3.8 cm x .30 cm) steel. Front Axle fabricated w/ sealed ball bearings Front caster wheels commercial duty steel roller bearing, greasable. Front caster forks are fabricated 3/8", 0.3750, 9.5250mm steel"
- Hour Meter: Standard
- ROPS: No Rops
- Controls: Hand-operated choke, throttle, ignition switch, electric mower clutch, Integrated parking brakes
- Cup Holder: Cup holder moulded into the left side fuel tank. Accommodates nearly any cup size.
- Height: 42" (1066.8 mm)
- Overall Length: 73" (1854.2 mm)
- Width 37.3" (947.42 mm) w/discharge chute up.
- Width (tyre-to-tyre): 38.3" (972.82 mm)
- Deck System: Side-Discharge: 36" cut. (2) Blades , deck is suspended at two points at the rear and one in front. Includes deck-mounted anti-scalp wheel(s) to improve flotation in rolling and uneven terrain.
- Cutting Widths: 36" cut Side Discharge
- Deck Lift: Foot-operated deck height adjustment.
- Deck Construction: 11 ga, .125" (3.1 mm) fabricated deck, doubler welded onto Reinforced 7ga, .179" (4.54mm) spindle mounts. Solid 3/8" x 1" (9.53 mm x 25.4 mm) steel bars reinforce impact areas on trim edges. Steel deck housing is 4.5" (114.3 mm) deep which allows high-capacity mowing.
- Cutting Height(s): "Foot-operated deck height adjustment. Pin for setting height, detent for transport position. Height adjustment in .25" increments from 1.5" to 4.5" (38.1 mm to 114 mm, 6 mm increments) "
- Blade(s): (2) Heavy-duty, heat treated, high-lift steel blades. 17.86" x 2.50" x .20"
- Blade Tip Speed: 18,400 fpm
- Blade Drive: Single V-belt drive from engine with electric clutch to two spindles. Spring tension idler for extended belt life.
- Spindles: Aluminium casting with 1.0" (25.4mm) shaft and double lip sealed ball bearings
- Discharge Chute: High density, rubberised.
- Width of Cut: 36" (914.4 mm)
- Trim Capacity: 0.5" (12.7 mm) [left side]
- Optional Accessories: "Optional accessories available for purchase separately include: Mulch Kit 36": HA123164. Blades included when purchasing this kit. The versatile Hustler mowing decks can side -discharge or mulch. With an ultra-cut, our deck is also the toughest in the industry. Recycles clippings under deck allowing clippings to be cut and recut, then discharged down into the grass. Reduces handling of clippings, improves appearance, and recycles nutrients back to the soil. Grass Catcher 36" HA934752 - 2 bag catcher [*must order (1) adapter kit . Easy-on, easy-off hopper assemblies. Steering Lever Extension Kit: HA122760 - Steering levers can be adjusted in several ways to make your mowing experience as comfortable as possible."
- Please Note: Specifications subject to change without notice.
Listing Specific Terms & Conditions
The Donors Retail Value estimate for this product or service, including GST is $6,799.00. The estimated net donation by the Donor to the nominated Charity for this listing is $299.50, minus if applicable, any PayPal fees or bank charges specific to this add.
Donor Business Information
Welcome to TMI
TMI is your one stop shop, for all your tractor and mower requirements. From tractor parts to tractor packages. We have it all.
Online tractor showroom
Our onlne showroom has the latest new tractor range from compact to large tractors available. TMI are Australian tractor dealer's for Deutz tractors, SAME tractors, Yanmar tractors and Kioti Daedong tractors. The showroom will give specs and package deals for all of these tractor brands.
Visit the online parts catalogue
Parts diagrams for kioti daedong and yanmar tractors, prices for parts and order them from our site. Sent direct to you Australia wide. Navigate throught the parts diagrams yorself.
For all the latest parts and accessories for your tractor. The aftermark range covers Kubota tractors, John Deere tractors, New Holland Tractors, Massey Ferguson Tractors, Fiat Tractors, David Brown Tractors and many more. Purchase all of these online and receive them direct Australia wide or arrange to pick up from Tractors Machinery Implements in the Sunshine Coast.